Block Magic Sealer
All Major Cards Excepted  Roof Cleaning Glasgow
Confederation of roofing contractors  Roof Cleaning Glasgow
Smartseal  Roof Cleaning Glasgow
Algoclear  Roof Cleaning Glasgow
Kingfisher  Roof Cleaning Glasgow
CONTACT INFORMATION Landline: 0808 1213 1214 Mobile: 07780808282 Email: info@cotecprotetivecoatings .co.uk
Cotec Protective Coatings
Call Back Roof Coating Glasgow
Tel: 0808 123 1214   Mob: 07780808282
Email: info@cotecprotectivecoatings.co.uk

Monoblock Cleaning Glasgow

Monoblock-Tarmcadam- Pattern Imprinted Concrete

Monoblock Cleaning Glasgow

Monoblock Cleaning & Sealing
A Quality Finish Every Time
Over the years without proper maintenance Monoblock Paving will gradually deteriorate. The general appearance of the driveway becomes untidy and the longer it is left the worse the problem becomes. Cotec Protective Coatings have been rejuvenating block paving driveways for many years returning them to that new look appearance.  Cotec’s driveway cleaning equipment is all commercial quality ensuring the best level of cleaning possible. If the driveway is contaminated with oil this requires to be treated prior to cleaning.  The monoblock cleaning is by rotary machine or a turbo lance which removes the contamination and some of the surface sand to a depth of about one inch.  The block is then rinsed after driveway cleaning to remove any residual sand followed by a application of biocide the driveway is now left to dry.  Once the driveway is dry which normally takes a minimum of one to two days dependent on the temperature it is brushed with KILN Dried sand.  The final optional step of driveway rejuvenation is the application of two coats of Premium Block Paving Sealer available in Matt Silk or Gloss.
Monoblock Paving Oil Removal Oil removal from your drive is accomplished by using a biological and bacterial agent to digest the oil stain. This new bio-degradable approach to the removal of oil stains from block paving driveway gives outstanding results.
Block Paving Sealer Monoblock Oil Remover
Restore-A-Drive
‣ Block sealer & colour restorer ‣ Manufactured using only premium grade resins, light fast pigments and hydro-carbon solvents ‣ Protects against moss and algal growth Restore-A-Drive is an amazing driveway resurfacing treatment that acts as both a block sealer and a colour restorer especially for resurfacing faded block paving and patio flags.  Restore-A-Drive brings back the bright pleasing colours of new paving that sun, rain, and frost wash away
Monoblock Cleaning & Sealing  Restore-A-Drive before  Restore-A-Drive after  Restore-A-Drive
Kiln dried sand Is very dry fine sand that contains no moisture. After cleaning the joints are filled with kiln dried sand which helps to stop the paving from moving and becoming loose.
Kiln Dried Sand
Block Fill
De-icing salts should not be applied directly on sealed block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the pavers. Subsequent freezing may result in the paving 'sealer' being broken by the expansion of water as it freezes, and white 'pitted' areas may become visible.
Resiblock pro de ice

Pattern Imprinted Concrete Glasgow

Pattern Imprinted Concrete

REPAIR & RE-SEAL
PIC Maintenance Pattern Imprinted concrete should be cleaned and re-sealed every 3-4 years the maintenance process is as follows. Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.  Step 2: A blend of repair fluid and clear sealer is applied in coat 1. A coat of clear sealer follows this. It is unusual that an additional coat of sealer will be require but will be applied if the desired effect is not reached. The photos to the right show a drive that has not lost any colour jsut some lustre so a few coats of sealer brings the drive back to that new look again.
Pattern Imprinted Concrete before Pattern Imprinted Concrete after Imprinted Concrete sealing PIC After 1
Over the years pattern imprinted concrete will fade losing colour and lustre and will also gather dirt from everyday use.  Thus, it does require continual maintenance to keep the drive looking pristine.  A top up coat of sealer every 3 to 4 years will keep the drive looking good. However, with our busy lives we may have overlooked the drive and don’t really notice until it is to late.  This then becomes a restoration task to bring the drive back to that new look again. We can re-colour repair and reseal your pattern imprinted concrete which will rejuvenate your drive.

Pattern imprinted Concrete the restoration process.

Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.  If the drive is oil stained, we can treat this area to remove the oil prior to cleaning. Step 2:  Pattern Imprinted Concrete often develops cracks chips which can be repaired however these blemishes might not always be invisible but will still be a vast improvement. Step 3:  We apply a blend of repair fluid-sealer and colour restorer in coat 1 this is followed by several coats of sealer and colour restorer to the desired effect is reached.   A final coat of clear sealer is applied to finish the process.  if required expansion gaps can be filled with silicone.
Imprinted Concrete Driveway without continual maintenance or if poorly laid can crack,crumble and larger section can sometimes break off as in the picture above.  Imprinted concrete can be repair although the repairs may not be completely invisible but can improve the driveway appearance immensely as seen in the before and after picture above.
PIC Repairs Imprinted Concrete Driveay Repairs Imprinted Concrete Driveway Sealing
Before
Before
After
After
The most common mistake most people make is using salt based ice melt to remove the ice. While this seems completely harmless at first, once the ice is gone you’ll notice blotches on the concrete that look very similar to hard water stains. These apparent stains come from the chemicals in the ice melt reacting with the dyes used to colour the surface.
Liquid Ice Melt
Liquid Ice Melt - MIM9 Ideal for stairwells, gantries and other areas which cannot be de-iced by salt Unique formula will typically de-ice down to -12.5°C and prevent refreezing down to -18°C Can prevent refreezing for up to 48 hours Formula is non-corrosive and friendly to the environment
Tarmacadam Driveways Glasgow
Tarmaseal is a high quality acrylic water based pigmented tarmac restorer. Tarmaseal not only transforms the surface, it also replaces lost resins and colour from the Tarmac. Once applied the tarmac surface will be protected, re-coloured and restored. If a top up coat of Tarmaseal is applied every few years, it will stay in good condition for years. Tarmaseal features & benefits Environmentally friendly product.Uniform finish to repaired or previously laid Tarmac.Totally restores colour loss from Tarmac.  Durable, long term restoration product  Easy re-application when required covers stains, spills and concrete residue.  Minimises and makes future maintenance far easier.  Reduces ‘stone loss’ and ‘fretting’.  Waterproofs, seals and protects Asphalt and Tarmac.  Resistant to staining.  Vastly superior to artificial looking Tarmac ‘paint’  Restricts moss and algae
Tarmacadam driveways
Repairs
Repairs
Block Magic Drive before Driveway Cleaning Glasgow Driveway Cleaning Glasgow
Before
Before
After
After
Block Paving Sealer
Confederation of roofing contractors  Roof Cleaning Glasgow
Algoclear Roof Cleaning Glasgow
Kingfisher Roof Coatings  Roof Cleaning Glasgow
Cotec Protective Coatings
Landline: 0808 123 1214  Mobile: 07780808282
Tarmacadam driveways
Tarmaseal is a high quality acrylic water based pigmented tarmac restorer. Tarmaseal not only transforms the surface, it also replaces lost resins and colour from the Tarmac. Once applied the tarmac surface will be protected, re-coloured and restored. If a top up coat of Tarmaseal is applied every few years, it will stay in good condition for years. Tarmaseal features & benefits Environmentally friendly product.Uniform finish to repaired or previously laid Tarmac.Totally restores colour loss from Tarmac.  Durable, long term restoration product  Easy re-application when required covers stains, spills and concrete residue.  Minimises and makes future maintenance far easier.  Reduces ‘stone loss’ and ‘fretting’.  Waterproofs, seals and protects Asphalt and Tarmac.  Resistant to staining.  Vastly superior to artificial looking Tarmac ‘paint’  Restricts moss and algae
PIC Repairs
Imprinted Concrete Driveway without continual maintenance or if poorly laid can crack,crumble and larger section can sometimes break off as in the picture above.  Imprinted concrete can be repair although the repairs may not be completely invisible but can improve the driveway appearance immensely as seen in the before and after picture above.
Over the years pattern imprinted concrete will fade losing colour and lustre and will also gather dirt from everyday use.  Thus, it does require continual maintenance to keep the drive looking pristine.  A top up coat of sealer every 3 to 4 years will keep the drive looking good. However, with our busy lives we may have overlooked the drive and don’t really notice until it is to late.  This then becomes a restoration task to bring the drive back to that new look again. We can re-colour repair and reseal your pattern imprinted concrete which will rejuvenate your drive.

Pattern imprinted Concrete the

restoration process.

Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.  If the drive is oil stained, we can treat this area to remove the oil prior to cleaning. Step 2:  Pattern Imprinted Concrete often develops cracks chips which can be repaired however these blemishes might not always be invisible but will still be a vast improvement. Step 3:  We apply a blend of repair fluid-sealer and colour restorer in coat 1 this is followed by several coats of sealer and colour restorer to the desired effect is reached.   A final coat of clear sealer is applied to finish the process.  if required expansion gaps can be filled with silicone.
Pattern Imprinted Concrete before
PIC Maintenance Pattern Imprinted concrete should be cleaned and re-sealed every 3-4 years the maintenance process is as follows. Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.  Step 2: A blend of repair fluid and clear sealer is applied in coat 1. A coat of clear sealer follows this. It is unusual that an additional coat of sealer will be require but will be applied if the desired effect is not reached. The photos to the right show a drive that has not lost any colour jsut some lustre so a few coats of sealer brings the drive back to that new look again.
De-icing salts should not be applied directly on sealed block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the pavers. Subsequent freezing may result in the paving 'sealer' being broken by the expansion of water as it freezes, and white 'pitted' areas may become visible.
Resiblock pro de ice Block Fill
Kiln Dried Sand
Kiln dried sand Is very dry fine sand that contains no moisture. After cleaning the joints are filled with kiln dried sand which helps to stop the paving from moving and becoming loose.
 Restore-A-Drive Monoblock Cleaning & Sealing  Restore-A-Drive before  Restore-A-Drive after
‣ Block sealer & colour restorer ‣ Manufactured using only premium grade resins, light fast pigments and hydro-carbon solvents ‣ Protects against moss and algal growth Restore-A-Drive is an amazing driveway resurfacing treatment that acts as both a block sealer and a colour restorer especially for resurfacing faded block paving and patio flags.  Restore-A-Drive brings back the bright pleasing colours of new paving that sun, rain, and frost wash away
Restore-A-Drive
Monoblock Paving Oil Removal Oil removal from your drive is accomplished by using a biological and bacterial agent to digest the oil stain. This new bio-degradable approach to the removal of oil stains from block paving driveway gives outstanding results.
Monoblock Oil Remover
Over the years without proper maintenance Monoblock Paving will gradually deteriorate. The general appearance of the driveway becomes untidy and the longer it is left the worse the problem becomes. Cotec Protective Coatings have been rejuvenating block paving driveways for many years returning them to that new look appearance.  Cotec’s driveway cleaning equipment is all commercial quality ensuring the best level of cleaning possible. If the driveway is contaminated with oil this requires to be treated prior to cleaning.  The monoblock cleaning is by rotary machine or a turbo lance which removes the contamination and some of the surface sand to a depth of about one inch.  The block is then rinsed after driveway cleaning to remove any residual sand followed by a application of biocide the driveway is now left to dry.  Once the driveway is dry which normally takes a minimum of one to two days dependent on the temperature it is brushed with KILN Dried sand.  The final optional step of driveway rejuvenation is the application of two coats of Premium Block Paving Sealer available in Matt Silk or Gloss.

Monoblock Cleaning Glasgow

Monoblock Cleaning Glasgow

Monoblock-Tarmcadam- Pattern Imprinted Concrete
The Scottish climate is wet thus the ground water content can be high.   It is the ground water content that affects this sand if the ground is wet the sand will absorbs the moisture and the sealer will not take. We can use Block Fill which is a moisture curing grout which will not wash out and inhibits weed growth but eliminates the moisture problem.
Benifits: Reduces sand loss from joints Reduces efflorescence Ultra-violet light and weather resistant Inhibits the growth of moss and weeds Enhances the colour of the paving Facilitates the easy removal of oil
Key properties: Penetrates and lifts oil stains from even the most porous surface.  Contains a blend of biological enzymes and bacteria to digest oil stains to completion Biodegradable building

Pattern Imprinted Concrete Glasgow

Pattern Imprinted Concrete after

Pattern Imprinted Concrete

REPAIR & RE-SEAL
Tarmacadam Driveways Glasgow
Block Magic Sealer Monoblock Oil Remover
Algoclear  Roof Cleaning Glasgow
Kingfisher  Roof Cleaning Glasgow
Confederation of roofing contractors  Roof Cleaning Glasgow
Smartseal  Roof Cleaning Glasgow
Email: info@cotecprotectivecoatings.co.uk
Tel: 0808 123 1214   Mob: 07780808282
Cotec Protective Coatings
Tarmacadam driveways
Tarmaseal is a high quality acrylic water based pigmented tarmac restorer. Tarmaseal not only transforms the surface, it also replaces lost resins and colour from the Tarmac. Once applied the tarmac surface will be protected, re-coloured and restored. If a top up coat of Tarmaseal is applied every few years, it will stay in good condition for years. Tarmaseal features & benefits Environmentally friendly product.Uniform finish to repaired or previously laid Tarmac.Totally restores colour loss from Tarmac.  Durable, long term restoration product  Easy re-application when required covers stains, spills and concrete residue.  Minimises and makes future maintenance far easier.  Reduces ‘stone loss’ and ‘fretting’.  Waterproofs, seals and protects Asphalt and Tarmac.  Resistant to staining.  Vastly superior to artificial looking Tarmac ‘paint’  Restricts moss and algae
Tarmacadam Driveways Glasgow
Liquid Ice Melt
Liquid Ice Melt - MIM9 Ideal for stairwells, gantries and other areas which cannot be de-iced by salt Unique formula will typically de-ice down to -12.5°C and prevent refreezing down to -18°C Can prevent refreezing for up to 48 hours Formula is non-corrosive and friendly to the environment
The most common mistake most people make is using salt based ice melt to remove the ice. While this seems completely harmless at first, once the ice is gone you’ll notice blotches on the concrete that look very similar to hard water stains. These apparent stains come from the chemicals in the ice melt reacting with the dyes used to colour the surface.
PIC Repairs Imprinted Concrete Driveay Repairs
Imprinted Concrete Driveway without continual maintenance or if poorly laid can crack,crumble and larger section can sometimes break off as in the picture above.  Imprinted concrete can be repair although the repairs may not be completely invisible but can improve the driveway appearance immensely as seen in the before and after picture above.
Over the years pattern imprinted concrete will fade losing colour and lustre and will also gather dirt from everyday use.  Thus, it does require continual maintenance to keep the drive looking pristine.  A top up coat of sealer every 3 to 4 years will keep the drive looking good. However, with our busy lives we may have overlooked the drive and don’t really notice until it is to late.  This then becomes a restoration task to bring the drive back to that new look again. We can re-colour repair and reseal your pattern imprinted concrete which will rejuvenate your drive.

Pattern imprinted Concrete the restoration process.

Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.  If the drive is oil stained, we can treat this area to remove the oil prior to cleaning. Step 2:  Pattern Imprinted Concrete often develops cracks chips which can be repaired however these blemishes might not always be invisible but will still be a vast improvement. Step 3:  We apply a blend of repair fluid-sealer and colour restorer in coat 1 this is followed by several coats of sealer and colour restorer to the desired effect is reached.   A final coat of clear sealer is applied to finish the process.  if required expansion gaps can be filled with silicone.
PIC After 1 Imprinted Concrete sealing

Pattern Imprinted Concrete

REPAIR & RE-SEAL
Pattern Imprinted Concrete after Pattern Imprinted Concrete before

Pattern Imprinted Concrete Glasgow

PIC Maintenance Pattern Imprinted concrete should be cleaned and re-sealed every 3-4 years the maintenance process is as follows. Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.  Step 2: A blend of repair fluid and clear sealer is applied in coat 1. A coat of clear sealer follows this. It is unusual that an additional coat of sealer will be require but will be applied if the desired effect is not reached. The photos to the right show a drive that has not lost any colour jsut some lustre so a few coats of sealer brings the drive back to that new look again.
De-icing salts should not be applied directly on sealed block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the pavers. Subsequent freezing may result in the paving 'sealer' being broken by the expansion of water as it freezes, and white 'pitted' areas may become visible.
Resiblock pro de ice Block Fill
Kiln Dried Sand
Kiln dried sand Is very dry fine sand that contains no moisture. After cleaning the joints are filled with kiln dried sand which helps to stop the paving from moving and becoming loose.
Monoblock Cleaning & Sealing  Restore-A-Drive before  Restore-A-Drive after
‣ Block sealer & colour restorer ‣ Manufactured using only premium grade resins, light fast pigments and hydro-carbon solvents ‣ Protects against moss and algal growth Restore-A-Drive is an amazing driveway resurfacing treatment that acts as both a block sealer and a colour restorer especially for resurfacing faded block paving and patio flags.  Restore-A-Drive brings back the bright pleasing colours of new paving that sun, rain, and frost wash away
Restore-A-Drive
Monoblock Paving Oil Removal Oil removal from your drive is accomplished by using a biological and bacterial agent to digest the oil stain. This new bio-degradable approach to the removal of oil stains from block paving driveway gives outstanding results.
Over the years without proper maintenance Monoblock Paving will gradually deteriorate. The general appearance of the driveway becomes untidy and the longer it is left the worse the problem becomes. Cotec Protective Coatings have been rejuvenating block paving driveways for many years returning them to that new look appearance.  Cotec’s driveway cleaning equipment is all commercial quality ensuring the best level of cleaning possible. If the driveway is contaminated with oil this requires to be treated prior to cleaning.  The monoblock cleaning is by rotary machine or a turbo lance which removes the contamination and some of the surface sand to a depth of about one inch.  The block is then rinsed after driveway cleaning to remove any residual sand followed by a application of biocide the driveway is now left to dry.  Once the driveway is dry which normally takes a minimum of one to two days dependent on the temperature it is brushed with KILN Dried sand.  The final optional step of driveway rejuvenation is the application of two coats of Premium Block Paving Sealer available in Matt Silk or Gloss.
Block Paving Sealer

Monoblock Cleaning Glasgow

Monoblock Cleaning Glasgow

Monoblock-Tarmcadam- Pattern Imprinted Concrete
 Restore-A-Drive Imprinted Concrete Driveway Sealing
Monoblock Cleaning & Sealing
A Quality Finish Every Time
Block Magic Drive before Driveway Cleaning Glasgow Driveway Cleaning Glasgow
Before
Before
After
After